Disc Spring for Preloaded Ball Bearing Slotted
Among the fantastic array of products which we offer, another top of the line item which we have developed is the Disc Springs with slots, which are used in the Preloading Ball Bearing process. Offering a high deviation rate along with low spring thrust attributes, allows the small sized bearings to run in an effective manner. Present on the inside diameter, helps in axial preload and backslash compensation. While they take up the extra operational noise which is created, these devices also lower the pressure on the bearings to a great extent.
These springs come with slots, and they have exceptional digressive characteristics which aids in consistent spring thrust, over a vast deflection range. The axial movement in any assembly would not affect the preload in any manner. Accomplishing the flatness via a special heat treatment process along with full contact area guides in consistent preload.
Advantages of Disc Spring for Preloaded Ball Bearing Slotted:
Our establishment holds large stocks of Disc Springs with slots which come in multiple sizes, and thus give a perfect result in the Preloading Ball Bearings process. They are generated by High Carbon Spring Steel material & phosphate finish.
Advantages of Ball Bearing Disc Springs Preloading Washers :
IIS has ready stock of all standard sizes of Disc Springs with slots for Preloading Ball Bearings with cross reference to Bearing numbers in High Carbon Spring Steel material & phosphate finish. Other materials are also available on View Details
Variety of coatings are available. For a detail list of coatings refer link
Ball Bearing designation no. | Diameter* | Di (mm) | Thickness | Unloaded height | L0.50 (mm) | F 0.50 (N) | L0.75 (mm) | F0.75 (N) |
623 | 9.8 | 6.2 | 0.15 | 0.6 | 0.23 | 9 | 0.35 | 13 |
624 | 12.8 | 7.2 | 0.2 | 0.65 | 0.23 | 16 | 0.35 | 18 |
625 634 | 15.8 | 8.2 | 0.25 | 0.75 | 0.25 | 17 | 0.4 | 20 |
626 635 | 18.8 | 9.2 | 0.25 | 1 | 0.38 | 17 | 0.55 | 20 |
607 | 18.8 | 10.2 | 0.25 | 1.05 | 0.4 | 19 | 0.6 | 24 |
608 627 | 21.8 | 12.3 | 0.25 | 1.25 | 0.5 | 19 | 0.75 | 24 |
609 | 23.7 | 14.3 | 0.3 | 1.3 | 0.5 | 21 | 0.75 | 25 |
6000 629 | 25.7 | 14.3 | 0.3 | 1.4 | 0.55 | 24 | 0.8 | 28 |
6001 | 27.7 | 17.3 | 0.35 | 1.45 | 0.55 | 25 | 0.8 | 31 |
6200 | 29.7 | 17.3 | 0.35 | 1.55 | 0.6 | 26 | 0.9 | 32 |
6002 6201 | 31.7 | 20.4 | 0.35 | 1.55 | 0.6 | 27 | 0.9 | 33 |
6300 | 34.6 | 20.4 | 0.35 | 1.65 | 0.65 | 27 | 1 | 32 |
6003 6202 | 34.6 | 22.4 | 0.35 | 1.55 | 0.6 | 27 | 0.9 | 32 |
6301 | 36.6 | 20.4 | 0.4 | 1.9 | 0.75 | 31 | 1.1 | 35 |
6203 | 39.6 | 25.5 | 0.4 | 1.9 | 0.75 | 33 | 1.1 | 37 |
6004 6302 | 41.6 | 25.5 | 0.45 | 2.05 | 0.80 | 34 | 1.2 | 39 |
6005 6204 6303 | 46.5 | 30.5 | 0.45 | 2.05 | 0.80 | 39 | 1.2 | 44 |
6205 6304 | 51.5 | 35.5 | 0.45 | 2.1 | 0.85 | 42 | 1.25 | 47 |
6006 | 54.5 | 40.5 | 0.45 | 2.15 | 0.85 | 48 | 1.3 | 53 |
|
|
INTERNATIONAL INDUSTRIAL SPRINGS
All Rights Reserved.(Terms of Use) Developed and Managed by Infocom Network Private Limited. |